CLASSIC 110

Product description:

Power and control cable with oil-resistant PVC insulation registered in VDE for a wide range of applications

Construction: Conductor formed by fine bare copper wires braided in accordance with IEC 60228 class 5

PVC insulation LAPP P8 / 1. Colors: Black numbered in white, according to VDE 0293-1

PVC outer cover, gray (RAL 7001)

Technical specifications:

Rated voltage: 300/500 V

Test voltage: 4,000 V

Temp. of service: -40 to +80 ºC

Bending radius: 4 Ø in fixed installations, 15 Ø in cable drag chains

Non-propagating flame, according to IEC 60332-1-2

Great chemical resistance, see appendix T1 of the catalog

Resistance to oils according to DIN EN 50290-2-22 (TM54)

Product Uses:

Fixed installation, as well as occasional flexible use

Dry or wet interiors, in mechanical stresses

Suitable for torsion applications in the “drip loop” of wind turbines (WTG)

In cable chains, for travel distances up to 5 m and 0.2 to 1 million flex cycles, only for sections from 0.5 to 2.5mm2 and from 2 to 7 conductors

CLASSIC 115CY

Product description:

Shielded PVC control and power cable with small outside diameter

Construction:

Conductor formed by thin strands of bare copper braided in accordance with IEC 60228 Class 5

PVC insulation LAPP P8 / 1. Color: Black numbered in white, conforming to VDE 0293-1

Plastic tape to hold the core

Tinned copper braid screen.

PVC outer cover, gray (RAL 7001)

Technical specifications:

Rated voltage: 300/500 V

Test voltage: 4,000 V

Temp. of service: -40 to +80 ºC

Bending radius: 6 Ø in fixed installations, 20 Ø occasional flexible use

Non-propagating flame, according to IEC 60332-1-2

Great chemical resistance, see appendix T1 of the catalog

Product Uses:

Measurement and control technology.

Office machines and systems for data processing.

Cables certified RETIE and EN 50525-2-51

Logo_Cidet_Classic_115CY_R

SERVO 2YSLCY-JB

Product description:

Low capacitance and double shielding power cable for motor power supply, compliant with EMC (CEM)

Construction:

Conductor formed by fine strands of bare braided copper. According to VDE 0295 CIase 5 / IEC 60228 CIase 5

Polyethylene insulation (PE). Colored conductors according to HD 308 S2 / VDE 0293-308

Conductors braided concentrically (around the central filling and with three geometrically distributed protection wires)

Screen of aluminum tape on the conductors.

Braided screen of tinned copper wires.

4-conductor model: PVC outer sheath, transparent.

Model 6 (3 + 3) conductor: outer sheath black PVC for outdoor use or direct burial.

Technical specifications:

Nominal voltage: 0.6 / 1 kV

Test voltage: 4,000 V

Temp. of service: -40 to +70 ºC

Bending radius: 4 Ø in fixed installations, 15 Ø occasional flexible use

The low capacitance design allows a longer cable length between the motor and the frequency converter.

For dry and wet interiors.

Product Uses:

Interconnection between the PWM type frequency converter and the motor.

Paper industry.

Chemical industry.

Heavy industry.

Cables certified RETIE and VDE 0276-603

Logo_Cidet_Servo_2YSLCY-JB_R

CLASSISOLAR XLWP

Product description:

Isolated solar cables with electron beam crosslinked copolymer with improved water performance – type EN 50618

Construction:

Optimized cable design – constant high-volume resistance even after a long period in contact with water
H1Z2Z2-K (type of construction according to EN 50618)
Driver’s formation: Thin wires twisted according to VDE 0295 Class 5 / IEC 60228 Class 5 Minimum bending radius: Fixed installation: 4 x outside diameter
Replaces the old ÖLFLEX® SOLAR XLR WP

Technical specifications:

Rated voltage: AC U0 / U: 1.0 / 1.0 kV DC U0 / U: 1.5 / 1.5 kV

Test voltage: AC 6500 V

Max. Temperature of conductor according to EN 60216-1: -40 ° C to + 120 ° C; Ambient temperature according to EN 50618: -40 ° C to + 90 ° C

Product Uses:

For installation in buried ducts, where water, heat and dirt can accumulate For installation in floating photovoltaic plants where the cable comes into contact with water or high atmospheric humidity (see technical data sheet) Suitable for direct buried: consult technical sheet

Cables certified RETIE and EN 50618

Logo_Cidet_Solar_XLWP_R